Industrial & Commercial SikaFloor Systems in Portland
When a facility floor needs to handle chemical spills, forklift traffic, ESD sensitivity, or food-processing compliance, the concrete slab alone is not enough. SikaFloor epoxy and urethane systems deliver the engineered topping that matches the actual use. Portland Concrete installs SikaFloor and SikaTop as a Sika-system specialist, selecting the right product from the full Sika range and executing the install to Sika specification. Every project includes a free written estimate.
SikaFloor is not a single product but a family of concrete floor systems, each engineered for different facility demands. SikaTop self-leveling products flatten uneven slabs before finish coatings go down. SikaFloor epoxy and polyurethane toppings provide the wear layer, chemical resistance, and slip control that industrial and commercial floors require. Specialty systems address ESD (electrostatic dissipation) for electronics manufacturing, food-grade urethane for processing plants, and decorative finishes for retail and showroom spaces.
We select the SikaFloor system based on the facility's actual conditions: traffic type and volume, chemical exposure, temperature swings, moisture, and any regulatory compliance needs. The slab is then prepped to Sika specification, the primer applied, the body coat installed at engineered thickness, and the topcoat cured per schedule. This discipline is what makes the system perform and what the Sika warranty covers.
We walk the space, understand the production process or traffic pattern, identify chemical or moisture exposure, and note any regulatory requirements (food-grade, ESD, anti-slip). This assessment drives the system selection.
Prepare the concrete slab
The slab is diamond-ground to the SikaFloor profile, old coatings and contaminants removed, cracks repaired with Sika-compatible materials, and the surface cleaned and primed with the matched Sika primer.
Apply SikaFloor system layers
The body coat is applied at engineered thickness, aggregate broadcast for slip resistance where needed, and the topcoat applied and cured per Sika schedule. Each layer is inspected before the next begins.
Document and transition to service
Material batch records, application thickness, and cure schedule are documented for warranty support. The floor is handed off with maintenance protocol and the facility can resume operations on schedule.
Why system match matters
Choosing the Right SikaFloor System for Your Facility
A SikaFloor system rated for chemical resistance but not forklift loads will spall under wheel traffic. A system rated for heavy traffic but light on chemical resistance will degrade under spills. The system must match the actual use, and that match is what separates a floor that lasts from one that fails early. We assess the facility, understand the demands, and select the SikaFloor product that delivers.
Coordinate with Sika repair for substrate issues, manufacturing floor programs for multi-zone facilities, and all Sika services to integrate the floor system into the broader concrete strategy.
System choice, ESD, chemical resistance, warranty and facility match.
Based on the use, traffic, chemical exposure, and any specialty requirements (ESD, food-grade, anti-slip). We confirm the actual conditions during the assessment and recommend the matched system from the Sika range.
Yes, with the conductive/dissipative SikaFloor systems engineered for ESD-sensitive electronics manufacturing and clean rooms. The resistance range is verified after install.
Yes, Sika has urethane cement systems with cove base integration for USDA/CFIA-compliant food processing floors. Cross-reference with our food-grade epoxy flooring service.
Yes when installed by a Sika-system installer to Sika spec. System warranty extends beyond product to install integrity, which is what commercial customers actually need.
Per zone, typically a week including cure before service. Larger facility-wide projects stretch with phased install. Schedule is in the quote.
SikaFloor urethane in our chemical handling zone. Three years of daily exposure, no degradation. The matched system spec made the difference.
Q. A6
Industrial Operations, Portland
★★★★★
ESD SikaFloor across our assembly zones. Resistance verified at install, documentation supports our customer audit. Real specialty system delivery.
Y. A6
Plant Manager, Vancouver
★★★★★
SikaTop self-leveling to bring slabs flat for tile install. Tile contractor said it was the easiest substrate he had worked on in months. Trade coordination paid off.
Z. A6
Facility Director, Hillsboro
★★★★★
They picked the right SikaFloor system for each zone in our multi-use facility, not one system everywhere. Better engineering, better outcomes.
X. A6
Operations Lead, Gresham
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Portland.
